Angled Leg Bench From Three 2x4s – Build Plans PDF

Build a modern bench with chunky angled legs from just three 2x4s. The legs are glued up from angled pieces cut on the bandsaw, and a notched brace lines the base up by itself. A 40" glued-up top finishes it off.

What's inside the PDF

• Materials and tools lists
• Cut list and cut diagram showing every part from the three boards
• 21 step-by-step instructions with photos: cutting and milling, tracing and cutting the angled leg pieces, gluing up the top and legs, cutting the notches, adding the brace and attaching the base to the top
• My tips from building this bench

Materials: three 8 ft 2x4s, long deck screws with washers, 90° metal connectors, wood glue.

Tools used: mitre saw (with a stop block), jointer or hand plane, table saw, planer, bandsaw, drill with 3/4" spade bit, clamps, sander.

Instant digital download (PDF). Print it or use it on your phone or tablet in the shop.